Lamp repair

Renae has a lamp from Ikea that she uses in her room. The poll cord broke recently, so I took the lamp apart to see if out could be fixed.

It was pretty easy to get the lamp apart.  The shade was held in place by a screw-on piece. Then, the bulb base was held in the stand of the lamp by another screw-on piece which was only finger tight.

By feeding the cord up through the stand, I was able to gain access to the base and reveal the point where the pull cord connects to the switch on the bulb base.

I'll be able to replace the pull cord, but I want to replace it with a chain that will not wear out so quickly.

Here's a close-up view of where the new pull cord will be attached.

It's not obvious from these photos, but
the silver sleeve where the pull cord is
coming out of the base was not aligned
to the white bushing on the outer part of
the lamp. This is what caused the cord to
break: by rubbing on the sharp edge every
time it was turned on and off.